Mike Henry

Sure is! We still love to support this hobby

That's really too bad. I looked forward to attending the show for many years.

Brian, Thanks for the added info and I'm glad to see that you've been so successful with Mach4. Is there a hobby-level version...

Is that confirmed now? It would be a shame, if true.

The dipstick ... The dipstick was the last item on my 'loose ends' list. Located in a busy area on the 289, the dipstick tube snakes...

I never actually got around to trying it out. I was at (possibly the last) CNC Workshop near Detroit several years ago and one of the...

Although the alternator will tension the fan belts, it's mostly a cosmetic addition. The goal was to come up with something realistic...

I was required to inspect the compressor tank at work annually. Even small pressure vessels on research equipement also required annual...

Hi I started my JH v-twin build in March 2022 and documented my progress on my YouTube channel @learningturningmetal Yesterday I managed...

The water neck returns coolant to the radiator and is part of the thermostat housing bolted to the front of the intake manifold. Its...

I never hand write any substantial amount of G-code. I often use the MDI square up rough stock, though. Tormach uses PathPiot, a...

I'm probably another outlier here. I've had used a Tormach PCNC 1100 for 15+ years and realized this year that I hadn't used my...

The insanely high temperatures and daily warnings about our shaky (Texas) power grid limited my shop time to a handful of midnight hours...

Has Mach4 matured enough to be reliable for most users? Perhaps 5 years ago or more it seemed to have problems in development.

Wrapping up the crankshaft ... The sections were clamped horizontally in the vise so the alignment flats on each end could be machined...