littlelocos

When I started trying to cast metal (aluminum was my first successful crude test casting), I wanted to cast engine parts in gray iron...

CO can be a real problem, and is why I don't melt any metal indoors with a burner. Another thing I run into in industry is low oxygen...

There are a lot of "experts" out there, and the problem is that often times they give incorrect advice, or make false assumptions. I...

This is the response I got from emailing Aaron in regard to space atthe show "The building is full, plenty of room under or tent. We...

Thanks for those short videos. Looks very interesting to be there.

The Black Hills show was GREAT! The largest exhibitor turnout in many years. I was really please with the amount of people that drove...

Check with Brent Myers at Myers Engine Works. He bought the Maytag projects from Brad Smith. Here's the Web site with the info. Gas...

Sure. We can do that. Not a problem.

Thought I'd post this here as this show is coming up quickly. The Machinist Group of NE Indiana is holding their show in Monroeville...

Hi Steve, Being as they can't go to the trouble of putting out any information I have decided to go to the Indiana show next month.

A little more progress with the Kiekhaefer powerboat racing engine in Fusion. Waiting for new Filament from Prusa. Just had a very bad...

Canadian Model Engineering would be my first port of call to see if they will sell you a set and they should also be able to supply any...

This ad should be blocked.

This seems akin to Ikea advertising on a cabinet makers forum.

Looks like someone ripped off the Farm Boy design and is now spam posting.