Ken I's latest activity

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

  • Ken I
    Ken I replied to the thread stirling 60 build.
    Anday1 - see also my thread on the Stirling 60 + my revised drawings. Ted was a great help there as well. Jeroen Jonkman's Sterling 60...
  • Ken I
    Ken I reacted to michael-au's post in the thread Demon V8 with Like Like.
    Thought i would start making some rocker arms using 4th axis here is a video of the process, it’s not in real time so it is a short video
  • Ken I
    Ken I replied to the thread Single Depth of Thread for 26 TPI.
    I gave up on using that idea or the indicator dial years ago simply because I've had the half nuts "ride" improperly closed and...
  • Ken I
    Ken I replied to the thread Mathematical question.
    Foozer,If you are looking for the locus of motion - here it is - red dot on the pitch circle diameter so ignore the teeth and consider...
    • M4GEAR-Model3.jpg
  • Ken I
    Ken I reacted to stanstocker's post in the thread Flycutter for gear hobbing. with Like Like.
    Hi Timo, OH BOY! Gear cutting! Books, no make that Tomes, have been written on gear forms, cutter creation, it's a lovely can or...
  • Ken I
    Ken I replied to the thread Mathematical question.
    Willray - I see your point - and got confused all over again so I drew in the other positions (rotation degrees indicated are for the...
    • M4GEAR-Model2.jpg
  • Ken I
    Ken I replied to the thread Mathematical question.
    Well I was wrong and of course Marv was right but I had to draw it out to convince myself By rotating a 10T planet gear about a 60T sun...
    • M4GEAR-Model.jpg
  • Ken I
    Ken I replied to the thread Mathematical question.
    I haven't looked at anything and my answer is 4 - the smaller outer turns 3 revs against the inner but in so doing rotates an additional...
    • CURRYTRI-Model.jpg
  • Ken I
    Ah K2, you've zoomed into my danger label - I censored it for the photo - given to me by an Australian friend "Not To Be Operated By...
    • danger-hurt.jpg
  • Ken I
    Here's a model of an industrial "Clampex" coupling I made - mostly just to see if it would work :- It worked fine - nut was a prototype...
    • CLAMPEX-Model.jpg
    • clampexassy.jpg
    • gbfront.jpg
  • Ken I
    Ken I replied to the thread gear cutters.
    Here's something I posted a few years back on home gear-cutting. It covers generating your own profiles (using AutoCad or similar) and...
  • Ken I
    Ken I reacted to minh-thanh's post in the thread Not Bad for a College Student with Like Like.
    Great run, Congratulations! Improvement : I don't know , but if ... make it more beautiful , wooden base , paint engine color ...
  • Ken I
    Ken I replied to the thread Hello From a Long Time Lurker.
    Welcome Mark - I too lurked for a long time - welcome to the forum and thanks for choosing my wobbler. Any issues feel free to ask and...
  • Ken I
    Ken I replied to the thread Greatings From Chicago!.
    Festo make small couplers (KD range) - the one in the video is a 5mm - they go down to 3mm. They auto close and I've never had a peep of...
    • FITTINGS-Model.jpg
  • Ken I
    Ken I replied to the thread Greatings From Chicago!.
    What's a wobbler. This is :- See plans etc. for this engine at the following post :- Magnetically Sprung Wobbler Regards, Ken
Top