Recent content by jor2daje

Hey Guys, Been several years since I've been on the forum excited to get back into the hobby now I have some shop space. One of my recent purchases to fill out a small amount said space was this sweet little Sanford SG48, it popped on Craigslist between my house and work so I had to jump on it...

thanks for all the great ideas guys, Ill try again at the eccentric shaft idea, I tried earlier but I didnt knurl it or anything. I like the collet ideas for grip but its a little time consuming, the reverse pliers and cleco tools both seem very viable. Thanks again

Hey guys I've got a bit of a improvement Id like to make at work but Im not sure about the best way to do it. We have the female halves of banana jacks that we need to instal in a panel the only problem is they are so close together you cannot fit wrenches around the nut and the flats on the...

I believe you could use convert entities at all the critical points to create circles that you could sweep using the section view as a guide curve, though Im not sure that's much easier than just redrawing the part from the dimensions.

Im not sure if this is the right place for this so mods feel free to move if incorrectly posted. Anyway, today I received a little "toy" from ebay, a peltier or thermoeletric cooler. Im sure lots of people already know about them but its a fairly simple device but a lot of fun to play with...

John, The shot was actually all taken at the same speed 420fps I think, but initially I doubled its speed about 3 or 4 times in windows movie maker to make it look close to the actual speed. Not really helpful to analyzing anything but does give you a rough idea of how fast its actually moving...

Great video very neat to watch, I have the one of the casios you mentioned, the fs10, and experimented a little when I had my southbend. The tool was probably incorrectly ground/ incorrectly used as it was just left over in the box of stuff I got with the lathe and my first time running a lathe...

Ive used IMG2CAD before for a few things and once you mess with the settings it works quite well.

thanks bill that would be great, I plan on making a couple small wobblers and stuff (<1") because theyll be a good practice, use less material and less chips to clean haha. -George

Hey guys so I own both a sherline 4400 (long bed) lathe and the standard 10" milling base but because Im confined to a college dorm room I currently only have room for the lathe. However the other day I saw that sherline makes something that allows you to attach the z-axis of a mill to where the...

Hey guys just stumbled across this on youtube its a cool video from the 1930's that shows all sorts of cool mechanical movements. It reminds me of the crazy clockwork book that brian posted and did a build on. http://www.youtube.com/watch?v=Y5pen3QMgzQ

got mine the other day too and I can already get much better finishes than I could with el cheapo indexible carbide. thanks again ;D

Ive used autodesk inventor for about a year now and it seems pretty good, I learned on both solidworks and inventor and they are fairly similar. I think it starts at about $795 which is more than you said, but they have free trials, and if you have a .edu email you get it and lots of other...

I love these haha, especially the engineer ones so I figure I should throw one that made me chuckle the other day up, what a great movie.

well I ended up getting what I think is a great deal ($20 shipped) on a starrett #216 mic. They seem great and are as accurate as anything I have convidence in the dimensions of. They feel very nice to use my only concern, is a slight hang or spot of higher resistance at seemingly random points...