f2cf1g

Stay Brite is not a silver solder, it's silver-tin i.e. a soft solder, not suitable for high temperature or strength.

Picking up this thread again after being away, the comparison between SLM and DMLS is interesting. According to the PCBWay web site...

Olli, you probably know this but in case not I suspect the problem you have is because the tank is a long way behind the engine and your...

Returning to 3D printing, here is better evidence of the print orientation. This is a macro picture of the top of the block in oblique...

Come on Lloyd, I learnt Fusion to a useful level a couple of years ago, at the age of 77. It's nowhere near too late. I suspect there...

Re the print orientation, as mentioned it in my first post, it seems to have been printed with the cylinder bore upright but its not...

Yes, that must be the alloy, they only offer one for SLM printing I think. As to test pieces, this is it. My only motivation was to get...

The accuracy of the selective laser melting (SLM) process is specified as plus and minus 0.3mm so I made the crankcase and cylinder...

I have used PCBway to print a Sugden Special crankcase. The accuracy and finish is generally good but there is evidence of what looks...