Search results

Just finished adding a Trav (A) Dial to my Craftsman 12"x 24" lathe, and thought I would share some pictures in case anyone else was thinking about doing this. I was very lucky to get this one at a great price, wish I could afford to put them on all my machines. Love keeping my toys old...

If anyone has any collets for a Linley Mk.1A Jig Bore (Schaublin ESX) please let me know. These are different that the newer ER-25 type collets and have a 22 degree included angle.

I finally finished the restoration of my Linley and got it down into my shop. I still need to make thumb screws for the X and Y axes and probably a belt guard, but I am happy with it. My brother-in-law gave me the Bridgeport #2 boring head, so that was a bonus! Below are some pictures, and I...

Thanks Dave, I have a link to that on the groups info page!

Hey Guys, I picked up a Linley Jig Bore in the spring, and have finally gotten around to starting the restoration. Since there is not much information on these great little machines, I thought I would start a Yahoo Group. If you have one of these machines, or or interested in them, you...

Thanks! I just used rattle can Krylon Industrial Tough Coat Dark Machine Gray. I will be ordering a new label for it soon. I used Blue tape on it, but it pulled off the label, shame, it was in great shape. Lisle no longer has them, so I had to create it myself.

My brother-in-law had given me a Lisle 91000 drill grinder that was pretty neglected. I was able to clean it up and make some modifications to make it more usable and wanted to share with everyone. The first mod was to drill out the pin that held in the drill holder and replace it with a...

Yes, the power down feed on the quill.

I have a line on a Linley Jig Bore that does not have the power feed. Does anyone have any picture of the inside of one in case I decide to make one for it?

I bought a set of grade B gage blocks, and I knew one was missing. Turns out, 4 were missing, they had 3 duplicates also. I checked into buying the four and it would cost as much as I paid for the whole set! The blocks are rectangular and approximately 1.20" x 0.350" I need the following...