Search results

well i done it.i made a thread to suit a nut 3/8 bs cycle thread 26 tpi a bit rough but i can improve,i found i had to play around with the minimum size so that after threading the thread was small enough for the nut to thread on, if it had`nt been for this forum i probably would have just given...

thanks for the replies.well thats the first thing i was doing wrong, i had the lever in the other position. but with the gears where your arrow is pointing the set up was similar but with the small gear on the inside.now to get the two big gears on the outside to mesh (50 and 40)i undone like...

thanks for your help gentlemen, but i have had no luck with making my own thread ,going by the lathe chart i ended up with a very very fine thread with the maryak chart i could`nt get the gears to fit,gear C interferes with gear A mounting shaft , i`m going to give it a rest for a while maybe...

this is the chart that came with the al320g lathe

hi there, i have an al320g lathe an can not work out the thread chart would somebody be able to tell me which gears to use to cut a 26tpi 60degree x3/8 bscy would appreciate any help/tips cheers dave :wall: