Search results

The used circuit is from a gas igniter, bought in a dutch store called "Blokker". Probably also avaidable in other countries, but the circuit might be different. As I'm not an expert with this I can't help u with other circuits. I've been buying two of these igniters because I couldn't find the...

Hi Dreeves, I don't fully understand the question, but do u mean the white plastic that has the plug inside? (Teflon naturel)

A littlebit late response by myself, but I've been sanding like a maniac with 400grit sandpaper and the edges are smooth now. The way i've done it: Sanding the tubes shown in the picture a littlebit more with the 400 sandpaper till i thought it was looking ok. After that I've been sanding...

I've been searching for this on the site but coulnd't find something that was similar. Lately I did cut a Optima Fortuna Glass Syringe for my combustion engine. However it wasn't a very nice cut so I needed to sand the tube to get a nice edge. I've been sanding this tube for at least 2-2.5...

I've been cutting my glass syringes yesterday and it was much easier than I thought. With my test-tubes I had problems that after making a scar I wasn't beable to make a clean 'break'. I've been using the Glass tube cutter as shown in this thread before. However some friend borrowed me a glass...

I've seen his cutter, but I don't have a dremel. And since I don't wanna screw the lathe machine on my work (ill be making the parts on my work in spare time) with glass dust. I've ordered the glasscutter shown before and will try cutting the glass for the carburetor first. I've ordered a few...

Portlandron, was the diamond coated disk rotating, or u was only rotating the Fortuna Syringe? And whats the name of the ebay seller? I can't find any on ebay, maybe he has some more syringes left (maybe didnt put them online for selling (yet)). He might be cheaper for me than the other company...

Bazmak, some people say u need to use the oil for cutting the line, but when heating it should be removed because otherwise it would burn 'into' the glass? Yesterday I've been using boiled and normal water to heat the score and cool it down again. But u used the same type of cutter and got a...

Hi Portlandron, I'm looking for the same syringes as you because i'm building a combustion engine (Also from Jan Ridders). The link is: http://heetgasmodelbouw.ridders.nu/Webpaginas/pagina_1-cilinder_glas_4takt/1cil_glas_frameset.htm The good point is that I've found a company that wants to...