Toymaker's latest activity

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    You're not alone in not fully understanding the math needed to predict where a given working fluid will change state from liquid to...
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    There's a short expression used among steam automobile enthusiasts I rather like; "Keep the Fluid moving!!" It means that as long as...
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    Hopefully, and with lots of luck and helpful suggestions from forum members like yourselves, at some future date I will have a...
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    The entire hot section of the burner assembly is located inside the boiler's copper tube coils, (see diagram in post #437). Any heat...
  • Toymaker
    Toymaker reacted to TimTaylor's post in the thread Monotube Flash Boiler Design with Like Like.
    These are design issues. Sometimes you can compensate via operational control changes, other times you just have to bite the bullet and...
  • Toymaker
    Toymaker reacted to TimTaylor's post in the thread Monotube Flash Boiler Design with Like Like.
    Steamchick, Your suggestion of an O2 sensor in the boiler exhaust is a good one. It looks to me like Toymaker is setting up his...
  • Toymaker
    Toymaker reacted to Steamchick's post in the thread Monotube Flash Boiler Design with Like Like.
    Thanks for the assessment of my comments. I reckon you are better in control than we know, but for sake of trying to help, I just...
  • Toymaker
    Toymaker reacted to TimTaylor's post in the thread Monotube Flash Boiler Design with Like Like.
    Troll, Hot spot tube failures in a water tube boiler are rarely caused by fire side issues - rather they are overwhelmingly the result...
  • Toymaker
    Toymaker reacted to HMEL's post in the thread Monotube Flash Boiler Design with Like Like.
    A blue flame is a result of complete combustion and it yields the highest temperature. If you do not allow flame impingement on the...
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    If I understand most of your post correctly, your overarching theme is, "be cognizant of energy density"; which is good advice which I...
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    Recall that the burner assembly has a stainless steel round disc or plate (left photo below), which restricts the flow of exhaust flames...
    • 07Dec22 Burner Restrictor Plate sml.jpg
    • 07Dec22 Burner video capture.JPG
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    My observations and analysis: I hope we can all agree that a blue flame is indicative of complete combustion which releases all the...
    • Boiler Assy.png
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    Soot build-up isn't the problem, but rather a symptom of the real problem which is poor fuel efficiency due to incomplete combustion.
  • Toymaker
    Toymaker reacted to The Ignoble Troll's post in the thread Monotube Flash Boiler Design with Like Like.
    It's the blue flame I wanted to comment on. Blue flames are an internet obsession that are not always correctly used. If you look at a...
  • Toymaker
    Toymaker replied to the thread Monotube Flash Boiler Design.
    First, thanks for the detailed info on combustion processes, very enlightening info concerning the eroding effects of blue flames...
Back
Top