Better late than never.
I'm John from Hamilton Ontario, Canada.
I'm 83 and have 2 engines under my belt.
An Upshore farm engine as well as just finishing an Howell V2.
Hello Gordon!!
I'm also ready to run my Howell V2, I've been working on for the last 12 years.
my problems are somewhat different but along the same lines.
I have great compression on both cylinders and good hot spark on both plugs at or slightly BTDC.
Also all valves are opening and closing at...
I have used a automotive window motor on my mill drill unit for about 10 years with good success.
I designed a very simple clutch and a reverse switch .
I build a small power supply with an 15 and 30Vdc outputs 30V is only used to return the table (no load)
The output is pulsated and the pulse...
Hy guys.
I've never posted anything yet as I'm pretty new to this stuff.
Here are the frames I was able to capture off John's video.
The pic's are no hell but they do show a very good spark.
I've asembled the circuit but hv'nt tested it yet.
I had a little trouble finding out the output pins of...
Hi John
I watched your video and was able to capture the big spark in a still pic.
I'm in the process off putting it together today .
Thanks again for all the help and sharing.
John VK.