Not to mention setup time (slicer orientation and support structure placement), restart time when you find the print has failed after quite some time of printing (you can't see the print until it lifts clear of the vat), the clean up time, the curing time.
You will also need good PPE and a very...
My personal uneducated opinion is that the issue is a combination of timing and carburetion. I have read some posts on RC forums about issues using 2 stroke carbs on 4 stroke engines.
My friend Joco_NZ has an AT4 vfd on his mill and the manual shows that it has pretty basic features whereas I have a HY02 (Huanyang clone) vfd for my Bridgeport mill (yet to be fitted) which appears to be quite feature rich.
Whilst I have had mine running I can't comment on performance yet Joco...
Here is my gas tank for my Rupnow IC engine
It is thick walled Ali tube - Internal thread and watch glass and thin oring captured by retaining ring
Works great
Hi Rudy
Nice engine. Thanks for the build thread
I am currently modelling up #770 and am having difficulties reconciling the dimensions on the Exhaust Valve Rocker Arm Bracket. I see from your drawings on post #33 that you may have had the same difficulties.
Could you please shed some light...
That is not right. According to EE's web site (https://www.eccentricengineering.com.au/index.php?option=com_content&view=article&id=36&Itemid=107) the holders can be used with the lathe running either forward or reverse. I have one and run it upside down in my normal toolpost with my lathe in...