Here in the UK the choice of Hit & Miss engines available to the model engineer is very limited compared to the US. I had almost resolved to the fact I would have to make the "little wonder" when MEB dropped on the doormat with the zero-six hit & miss design inside.
I was not too keen on the look of the engine as I wanted something that looked like it was made from castings. After a few sketches this is what I came up with, mechanically its the same as the "06" but looks a bit different. Flywheels are 7" Stuart spares, Boston Gears all other parts made from bar,plate and sheet.
Jason
I was not too keen on the look of the engine as I wanted something that looked like it was made from castings. After a few sketches this is what I came up with, mechanically its the same as the "06" but looks a bit different. Flywheels are 7" Stuart spares, Boston Gears all other parts made from bar,plate and sheet.
![07-8-1.jpg](https://proxy.imagearchive.com/8bc/8bc24ca9e4f90a6b074d10eaf3fe056c.jpg)
![07-0-1.jpg](https://proxy.imagearchive.com/85f/85fe56bb1c624edeb53fff27ad8838aa.jpg)
![07-10-1.jpg](https://proxy.imagearchive.com/b74/b747636550670de6f09a36d241b7d881.jpg)
Jason