Lother Matrian Engine kits available again

[Jasonb]

The latest issue of MiM dropped on the mat today and I thought I would just take a look at the website of one of the small adverts in the mag for www.steamofsteel.de and found that they are now producing casting sets for the many steam engine models that I have seen over the years originally designed and sold by Lother Martrian so thought the castingaholics may want to take a look and break open the piggybank. They also cater for those like me and sell the drawings separately.

https://www.steamofsteel.de/

 

[GreenTwin]

That Henry Ford engine looks impressive.

Looks to be perhaps 18" long ?

https://www.steamofsteel.de/p/gussteilsatz-novelty
.

 

[Jasonb]

Almost, 450mm long with near 11" flywheel. All engines have the basic sizes in the last photo or on the product data sheet

 

[modelbuff]

The latest issue of MiM dropped on the mat today and I thought I would just take a look at the website of one of the small adverts in the mag for www.steamofsteel.de and found that they are now producing casting sets for the many steam engine models that I have seen over the years originally designed and sold by Lother Martrian so thought the castingaholics may want to take a look and break open the piggybank. They also cater for those like me and sell the drawings separately.

https://www.steamofsteel.de/

After reviewing the steam of steel website I found a casting set I am interested in building. Can anyone who has purchased from steam of steel or has knowledge of this supplier comment on the service/reliablity of this supplier?