Eagle 5c Collet Chuck - SOLD

[BillH]

Hello all, I am selling my Eagle 5c Collet chuck.
The picture shows the chuck with a backplate to fit it to a Lathemaster 8x14 lathe.
I am asking 100$ for the chuck, and if you want the backplate as well, 120$ for both, + shipping.
This is the 5c chuck that Lathemaster sells.
I used this chuck only once and looks almost new.
Thanks, Bill Holland

 

[BillH]

In process of selling

 

[twineman]

Bill
Where are you located. I couldn't find anything in your profile.
What size threads are on the backing plate?
Allen

 

[BillH]

Naples, FL. I'll have to check the threads but my memory tells me they are 8mm diameter, course thread, boltcircle for a Lathemaster 8x14

 

[twineman]

Bill

I will take the chuck. PM me with info for shipping and payment details.
What I meant for the threads was the spindle thread size on the back plate. I have a Logan with 1 1/2" x 8 spindle threads and if your backing plate has this size thread i will take it too.
Thanks
Allen

 

[BillH]

The backplate is not for a threaded spindle.
The chuck is in process of being sold, awaiting payment.

 

[BillH]

Sold