ejrego

Hello, I have come up with this design for now. The pressure I am looking for above the small piston is 52bar. It is supposed to use...

No problem. I guessed you had meant something a bit different from the words... But I'm also sure that we could make the whole engine...

I am running some FEA simulations. So far so good, unless I have something really wrong. I am using a piston similar to the ones in an...

Sorry I worded that wrong. What I meant that with today's capabilities, we can make a simpler design.

Those seem a little bit too complicated for today's manufacturing capabilities. I think some casting and machining afterwards can help...

Is there a reason why the high pressure pistons were domed?

@GreenTwin Thank you for your advice. I was thinking of looking into using some composite material for the pistons. I will test and...

Thank you very much guys, that has been very helpful. Especially the formula provided by @peterl95124. I was able to get at least a...

Thank you @GreenTwin for this chart. That is very extensive. I am looking at the Doble steam engine used on the E-20. From my...

Hello, I am a mechanical engineer and haven't touched anything that has to do in thermodynamics for 15 years (gosh I just realized how...