davidyat

I have a Bridgeport Mill. Do you have pictures of how you mounted the DRO for the Quill. Grasshopper

This is some information I will really remember. Thanks, Grasshopper

Andrew, Thanks for you response. I live in Indianapolis, Indiana USA. But I did have enough material left over that I decided to...

Brian, I got very lucky. A friend of mine upgraded his CNC and because I've done a lot of favors for him, he just gave me his old...

I live in Indianapolis. Looking forward to the total eclipse in my backyard. My friend Vederstein is only 6 miles from me. Grasshopper

Are there any EDM services here on HMEM? I'm building Vederstein's Dancer engine and manage to break off a 1/8 drill bit about 1/2 inch...

First off, thank you everyone for your input. I'm just an amateur machinist. I just want to make a steam engine, make it run, then put...

Well, took the plunge and cut the blanks I had made for the bevel gears. My machining mentor showed me how I had to make 3 passes and...

I could use some help. I've cut spur gears before but now I want to tackle bevel gears. If there are any threads on HMEM for this...