What to do with a 2 axis DRO when you what 3 axis.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 31, 2010
Messages
306
Reaction score
69
I have a Jet JVM-830F that I put a 2 axis DRO many years ago. I decided that I wanted a 3 axis DRO.

What was on it was a Sargon that went out of business years ago. I was thinking I would need to change out everything.

I found that Linear Measuring Systems makes adapters to use Sargon and other systems to work with Jenix DRO systems.

For less than $500 I was able to purchase a new scale and display that would use my already installed scales.

Tim
25C13571-CB7F-4875-AB44-13F52C6BE85D.jpeg
 
I have a Jet JVM-830F that I put a 2 axis DRO many years ago. I decided that I wanted a 3 axis DRO.

What was on it was a Sargon that went out of business years ago. I was thinking I would need to change out everything.

I found that Linear Measuring Systems makes adapters to use Sargon and other systems to work with Jenix DRO systems.

For less than $500 I was able to purchase a new scale and display that would use my already installed scales.

TimView attachment 138869
Your screen is 3 axis by front cover
What does back look like?

Dave
 
This is the new 3 axis display.

The old one was just 2 axis and had no functions.

Tim
From Shars.com you buy a single axis display for quill or knee.

You can find them on Amazon too

Dave
 

Latest posts

Back
Top