Webster valve body/block

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

coyotebgone

Member
Joined
Feb 16, 2010
Messages
12
Reaction score
0
Location
Mississippi USA
This valve body plan makes no sense to me. Anyone have a picture of this or plans that are more straight forward. (I am sure this is my fault, since this is my first engine). Thanks
1637866463352.png
.
1637866403707.png
 
Here are my parts:
IMG_20210530_181522_408.jpg

Sorry for the out of focus photo, phone had a lot of trouble focusing on the shiny metal.
I counterbored the middle piece on both sides to clear my valve cages (they weren't perfectly flush) and used metric drill and fastener sizes, but hopefully they give you an idea of where you are going.
 
I had a quick look and did this 3D cad which should explain , I have left out the valves and springs.
Screen-Shot-2021-11-26-at-00-06-42.png

Screen-Shot-2021-11-26-at-00-07-45.png

Screen-Shot-2021-11-26-at-00-07-19.png
 

Latest posts

Back
Top