waterloo traction engine .29 scale

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Well that made my head hurt lol
On to the plater gears......72 teeth it will be a while
 

Attachments

  • IMG_20230129_175334.jpg
    IMG_20230129_175334.jpg
    1.9 MB · Views: 5
That was a long day
Think I'll change the design for the others it's a lot of blind broaching and fitting
Bore it and the first on tomorrow
 

Attachments

  • IMG_20230204_231122.jpg
    IMG_20230204_231122.jpg
    1.8 MB · Views: 6
  • IMG_20230204_231143.jpg
    IMG_20230204_231143.jpg
    1.8 MB · Views: 4
  • IMG_20230204_231201.jpg
    IMG_20230204_231201.jpg
    1.8 MB · Views: 6
  • IMG_20230204_231109.jpg
    IMG_20230204_231109.jpg
    1.9 MB · Views: 4
Well ...it went
Box lifted on the intermediate gear usable but more grinding and filing for sure
Clutch gear ok and the cover plate for the intermediate gear is good
 

Attachments

  • IMG_20230228_191236.jpg
    IMG_20230228_191236.jpg
    1.8 MB · Views: 3
  • IMG_20230228_191228.jpg
    IMG_20230228_191228.jpg
    1.8 MB · Views: 5
  • IMG_20230228_191221.jpg
    IMG_20230228_191221.jpg
    1.8 MB · Views: 6
Steering gear brackets and intermediate gear mount ...finally in iron
 

Attachments

  • IMG_20230327_192538.jpg
    IMG_20230327_192538.jpg
    1.9 MB · Views: 5
  • IMG_20230327_192532.jpg
    IMG_20230327_192532.jpg
    1.5 MB · Views: 4
  • IMG_20230327_192520.jpg
    IMG_20230327_192520.jpg
    1.6 MB · Views: 4
  • IMG_20230327_192505.jpg
    IMG_20230327_192505.jpg
    1.4 MB · Views: 6
  • IMG_20230327_192454.jpg
    IMG_20230327_192454.jpg
    1.7 MB · Views: 9
  • IMG_20230327_192446.jpg
    IMG_20230327_192446.jpg
    1.7 MB · Views: 3

Latest posts

Back
Top