waterloo traction engine .29 scale

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The proper casting for the flywheel side is on now
And a start at the wheel mounts
And today's pour for one of the six others
Thanks
Todd
 

Attachments

  • received_1922521894617158.jpeg
    received_1922521894617158.jpeg
    41 KB · Views: 136
  • received_1477766042610705.jpeg
    received_1477766042610705.jpeg
    51.7 KB · Views: 140
  • received_288810326516622.jpeg
    received_288810326516622.jpeg
    55.2 KB · Views: 144
Engines #3&4 are underway ......the bearing bore and Babbitt should take care of the blow hole
 

Attachments

  • received_453676956425511.jpeg
    received_453676956425511.jpeg
    57.9 KB · Views: 96
  • received_1348859828904276.jpeg
    received_1348859828904276.jpeg
    55.4 KB · Views: 88
  • received_815130145867722.jpeg
    received_815130145867722.jpeg
    41.8 KB · Views: 89
  • received_339948767852902.jpeg
    received_339948767852902.jpeg
    37 KB · Views: 92
Well that will work as you can see one of the inner spikes is full .....new that before we poured it .....
But paired it to the ones that are finished
Bull gear and pinion at the right center distance.
Went round no trouble .
Now to finish the guts for it .....need 30 hr days lol
 

Attachments

  • IMG_20230105_212619.jpg
    IMG_20230105_212619.jpg
    1.8 MB · Views: 1
  • IMG_20230105_212648.jpg
    IMG_20230105_212648.jpg
    1.8 MB · Views: 0
  • IMG_20230105_212707.jpg
    IMG_20230105_212707.jpg
    1.6 MB · Views: 0
Machine the keeper's cut the gears I'll be finished lol......alot of hours in the differential .
Thae the plater gear roughed out...2nd pair of castings are much better lol.
 

Attachments

  • IMG_20230126_213338.jpg
    IMG_20230126_213338.jpg
    1.8 MB · Views: 0
  • IMG_20230126_213315.jpg
    IMG_20230126_213315.jpg
    2.3 MB · Views: 0
  • IMG_20230124_212954.jpg
    IMG_20230124_212954.jpg
    2 MB · Views: 0

Latest posts

Back
Top