Upshur Horizontal engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Mission is accomplished :D
In the video we can see a test with an extension tube for the carburetor and everything works well, the second part of the video is with the work as it should.
If the carburetor is too close to the engine, as the engine is air-cooled, the duct and carburetor will heat up and the fuel will vaporize before the engine can "swallow" it.
 
The engine heats up then it is better to add the cooling unit, to avoid touching the cylinder I preferred to add the cooling collar, this piece is held by two metal bands :D
 

Attachments

  • P8150088.JPG
    P8150088.JPG
    58.6 KB · Views: 181
  • P8150089.JPG
    P8150089.JPG
    114.8 KB · Views: 163
  • P8150090.JPG
    P8150090.JPG
    61 KB · Views: 145
  • P8150092.JPG
    P8150092.JPG
    122.4 KB · Views: 169
  • P8150094.JPG
    P8150094.JPG
    52 KB · Views: 174
  • P8150095.JPG
    P8150095.JPG
    47.2 KB · Views: 146
  • P8150098.JPG
    P8150098.JPG
    117 KB · Views: 136
  • P8150101.JPG
    P8150101.JPG
    71.3 KB · Views: 153
  • P8150102.JPG
    P8150102.JPG
    60.2 KB · Views: 169
  • P8160103.JPG
    P8160103.JPG
    42.1 KB · Views: 177
More photos
 

Attachments

  • P8160106.JPG
    P8160106.JPG
    85.7 KB · Views: 189
  • P8160108.JPG
    P8160108.JPG
    107.8 KB · Views: 204
  • P8160109.JPG
    P8160109.JPG
    77.7 KB · Views: 158

Latest posts

Back
Top