Team Build No.5A

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
J

JorgensenSteam

Guest
Hello HMEM folks, and welcome to Team Build No.5A.

Edit: I will be unable to do Team Build No. 5A.
There is a link to the drawings for this engine near the end of the posts for the TB5 posts for anyone interested.
The TB5 engine is an intermediate level engine, and is called the "No.21".

The Bernay mentioned below is a different engine, and is an advanced engine.
The Bernay drawings are located in the download section of this forum.



 
As I'll have a full sized engine from tb5, I'd like to see a scaled version for tb5a. I think they would look nice on the shelf together.

If it happens, I'd like to do the flywheels. I'll throw in the bases, since there are still lots of offcuts left to use up in the shop.

Any volunteers to run the build - scale the drawings etc? What scale shall we do?
 
The plans for the TB5 engine are in the tb5 thread. Look for rev6 drawings.

So far as I know tb5a was dropped. No reason though why you couldn't start it up again if you can find some like minded folks.

I became part of TB5 and have picked up other projects along the way, so wouldn't be doing a tb5a.
 
BigOnSteam said:
Hello HMEM folks, and welcome to Team Build No.5A-
Hi...I'm new here and I looked through the downloads....is the 5A build going to be the BERNAY Steam Engine?? I'd like to look at what I may be capable of building.
 

Latest posts

Back
Top