Succeed in the 3D CNC aluminium propeller milling

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

laurent_parti

Well-Known Member
Joined
Jun 11, 2013
Messages
46
Reaction score
6
Hi all,

Really appreciate all the support from many of you and I would not let this project stand alone.
I made some analysis and testings and I found a good solution, as the machine is different from a regular CNC Lol.
Would not let you miss the result of the top face CNC milling:

[ame]http://www.youtube.com/watch?v=bJOY3dwpX_w[/ame]

Laurent
 
Way to go Laurent! Now you got to work on surface finish and a jig to locate it so you can do the other side.

You're moving the right direction!
 
Way to go Laurent! Now you got to work on surface finish and a jig to locate it so you can do the other side.

You're moving the right direction!


Thanks JWCNC1911. I already created a jig it with 4 pins ( on my channel it is the part #3 of the propeller milling) and did the back side. Will post the video next week.
Regarding the surface finish, I did not have received the proper end mill at time and use a too small one.

Laurent
 

Latest posts

Back
Top