Some of my stuff...

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here, the blower for the exhaust steam is ready to use:

347_ab7ce8edcaeb5b8832529aff469b7156.jpg



I had to modify the water gauge as its level raised for 10 mm when i took steam out of the boiler. I also added two brass rods to protect the glass.

347_20c134434ec82ea2b6e379bb56f39e5e.jpg



347_b51785c3ec8d247df9f05a977501f1d7.jpg
 
That is beautiful work. I've been trying to look for plans for a loco. Are those your own plans or did you get some some where?
John T.
 
Wow. I am flabbergasted. Thats some nice work you got going on.

Eric
 
J. Tranter said:
That is beautiful work. I've been trying to look for plans for a loco. Are those your own plans or did you get some some where?
John T.

Hi John

I have no plans... its just scratchbuilt with a few self made sketches.

Florian
 
WELL DONE Florian..really!!! :bow: :bow: :bow:
Paolo
 
A week after finishing, i received the pressure gauge i ordered:

347_567f5ae4b904bb8e9c6b0e67f6f40215.jpg


347_0fc6e6bde2f09318bd1609df1e232856.jpg




I also added a bleeder to the water gauge to improve its operability:

347_e7b5ae9ca5a8fb95d73fb7a1f627f688.jpg
 
And, afther presenting the whole project, i have some Videos (That's what you all were waiting for... right? ;D )

a


a


a


a
 

Latest posts

Back
Top