wheeltapper
Senior Member
- Joined
- Jun 25, 2010
- Messages
- 143
- Reaction score
- 14
Hi
For some time now I've been getting fed up with the topslide on my lathe.
it gets in the way, it puts too much flex in the tool ( tool cutting on the return pass) and I only need it for cutting a taper.
so I took it off.
heres what I have now.
I also made a seperate block to go in place of the QC holder to hold standard half inch round shank boring bars.
the whole thing is much stiffer now.
Roy
For some time now I've been getting fed up with the topslide on my lathe.
it gets in the way, it puts too much flex in the tool ( tool cutting on the return pass) and I only need it for cutting a taper.
so I took it off.
heres what I have now.
I also made a seperate block to go in place of the QC holder to hold standard half inch round shank boring bars.
the whole thing is much stiffer now.
Roy