Project of the Month - July 2017

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Shelton

Administrator
Staff member
Administrator
HMEM Supporting Member
Joined
Aug 1, 2016
Messages
802
Reaction score
380
Congratulations SilverSanJuan

on your build of the

3/4" Pennsy A3

HMEM real July 2017 POM.jpg

Here is the build thread for the 3/4" Pennsy A3

Check out the HMEM Page on Facebook to see this as the cover photo.
 
Thank you so much. I'm honored and humbled. There are a lot of very talented folks here. :)
 
I’ve been following your build. Beautiful work and a well deserved POM
Congratulations
 
Very well done. I like your work. Especially the green colour. Could you tell us the RAL number?

Jorge
 
I like the red wheels, nice contrast. Is it going to be a static model or do you have a place to run it.
 
Hi Jorge: Thanks. There is no paint on it yet. I think it is just the brass picking up a green hue.

Hi nkalbrr: Thanks. This will be a running engine. I don't have a track at this point. But, I'll be building something in my yard to run on. Also, the Pioneer Valley live steam club in Massachusetts has a 3.5" gauge track that I'll probably visit.
 

Latest posts

Back
Top