Plans ???

[Bruce R.]

I went through the plans sub forum page by page today and it seems like 95 percent of it is people looking for plans. What actual plans I did find wouldn’t download, and most of the links I clicked on took me to a site that was peddling a strange mixture of car engines and gardening tools. I’m a little confused.

 

[stevehuckss396]

Best thing to do is ask on the forum and describe what type of engine you would like to build. Folks here can let you know if they exist and where to purchase them or download for free if available that way.

 

[Bruce R.]

I’m not looking for anything in particular, I just figured the sub forum was full of plans and I’d just scroll through them until something caught my eye.

 

[vederstein]

All of the engines I've designed should be here on this website available at no charge. Note that some worked better than others and the older designs were posted before I actually built them. Check out the build logs for more information:

https://www.homemodelenginemachinist.com/threads/plans-camgine-a-k-a-spherical-bearing-engine.31416/

https://www.homemodelenginemachinis...double-acting-steam-engine.30980/#post-319661

https://www.homemodelenginemachinist.com/threads/five-cylinder-wobbler-plans.26783/#post-293513

https://www.homemodelenginemachinist.com/threads/simple-steam-turbine-plans.26524/

https://www.homemodelenginemachinist.com/threads/rotary-engine-design.19381/

 

[Brian Rupnow]

I have designed and built a number of engines which all have complete build threads posted in the forums. These engine plans are complete with part details and assembly drawings. I sell individual plan sets for $25 Canadian per set.---Brian Rupnow

PLANS FOR ENGINES

#1 IS A VERTICAL HIT AND MISS I.C. ENGINE

https://www.homemodelenginemachinist.com/threads/verical-hit-and-miss-engine.31370/

#2 IS AN OPPOSED 2 CYLINDER I.C ENGINE

https://www.homemodelenginemachinist.com/threads/opposed-twin-i-c.24899/

#3 IS FOR A THROTTLED SIDE-SHAFT I.C ENGINE

https://www.homemodelenginemachinist.com/threads/sideshaft-i-c-horizontal-engine.31124/#post-322019

#4 IS FOR A SIDESHAFT HIT AND MISS I.C ENGINE

https://www.homemodelenginemachinis...aft-hit-and-miss-engine-from-bar-stock.30669/

#5 IS FOR A UNIQUELY CONFIGURED WATER COOLED I.C. ENGINE

https://www.homemodelenginemachinist.com/threads/rockerblock-i-c-something-a-little-different.26716/

#6 IS FOR A TWIN CYLINDER AIR/STEAM ENGINE WITH REVERSING VALVE

https://www.homemodelenginemachinist.com/threads/double-acting-double-oscillator.30137/

#7 IS FOR A STIRLING ENGINE

https://www.homemodelenginemachinis...-from-hell-and-maybe-a-stirling-engine.27390/

#8---A VERY DIFFERENT SINGLE CYLINDER AIR/STEAM ENGINE

https://www.homemodelenginemachinist.com/threads/inspiration-for-new-air-motor.27626/

#9---A VERY NICE OVER-CENTER MANUAL CLUTCH

https://www.homemodelenginemachinist.com/threads/over-center-manual-cone-clutch.30605/

 

[Bruce R.]

Thanks Brian, are there any photos on the forum of the side shaft hit n miss ? I tried searching it and got nothing

 

[Brian Rupnow]

Bruce--There are 19 pages of the build thread in the link I posted. There is a video of the engine running on page 19.---Brian