Philip Duclos Gearless Hit'n Miss IC

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Looper7

Well-Known Member
Joined
Dec 10, 2013
Messages
51
Reaction score
15
Philip Duclos Gearless 4 stroke Hit'n Miss Engine

This is where I deviate from the print I have The flywheel on the opposite side so that One can see the magic.
Using the governor balls from Philip Duclos Victorian engine. There are several things I would fix or do better next time. Going to leave things the way they are to remind me about the journey. Calling it finished.




http://youtu.be/ictIvv9WOxQ
9 second preview thanks for watching

http://youtu.be/qcQN4JdSEGg
HD 57 seconds



Jeff Hickenlooper
 
That is an interesting flywheel. Did you cast brass into the aluminum?
Mike
 
Mike
These were drilled reamed and then pressed .375 brass bar stock. The flywheel changed as I learned that you need more outer mass to run slower.


Jeff Hickenlooper
 

Latest posts

Back
Top