Not a really Modification

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paolo

Well-Known Member
Joined
Nov 19, 2007
Messages
573
Reaction score
8
Some times ago I adapted the Mini-Mill Power Feed from SIEG to my Einhell Mill...I had to do some works...(It will be a topic for my next post). Emergency stop for stopping at same time power feeder and mill engine..was needed but without big modification...so I built that box...one plug..two receptacle for the engine mill plug and power feeder plug..and an emergency stop!!!! It works well... ::)

DSC01089.jpg


DSC00663.jpg


DSC01088.jpg


 
Paulo
I've used that power feed for about 3 years now. They are somewhat adjustable for additional torque and speed, and they can be modified to add a bit of power by replacing the R23 resistor with a new 2K ohm resistor. I've also modified one to independent power feed my mini lathe. It worked pretty well, but I've since upgraded it to another configuration which is almost complete as I write this. Excellent little units, especially considering price and size.

Steve
 
Hi Steve
..Yes I did the same modification. I have seen it on a site..
 

Latest posts

Back
Top