Seagar:
Beautiful old lathe a quick look at Tonys site It look like an early one around 1910. can you find a serial number there is a serial nuber guid on the above site.
Tin
Thanks for all your interest fellows,it does run as sweet as ... and it is as a tight drum.I havn,t been abel to find a serial number but I will have another look later.
Do not know where colchester stamped serial numbers but my 1937 south bend has the serial number stamped on the top of the bed on the tailstock end.
Tin
I have been beating this photo to death here.
The shape of the base screams early 1900's.
The dovetail ways and V-belt drive would have been 1950 or later.
my guess is someone replaced the original pulleys with v pulleys errg yes they work better but on a likely 1910 vintage machine I do not like. The earliest photos on lathes . Uk are of the 1920s model your machine looks older. Apparently production started around 1908.
Tin
With all your help ,I have now found the serial number(under the tail stock)677,which appears that it was made in 1911.I don't know if that makes it worth anything but is sure runs nice for a 98 year old. I hope I run as good at that age.