New member from Arkansas here!

[ddallen1]

Thanks for the add to the forum. I’ve some machining experience. Slowly working on a 9 cylinder radial from Ageless Engines, Lee Hodges design. Anyone else working this model presently?

 

[GreenTwin]

Welcome, glad to have you.

Those Ozark Moutains towards the north have some fantastic scenery.

Good luck with your build; perhaps someone here can help you.

Pat J

 

[minh-thanh]

Welcome to the forum !
It would be great if you could make a thread about your engine

 

[Apprentice707]

Welcome ddallen1, looks like we might learn a few things from you.

B

 

[ajoeiam]

Thanks for the add to the forum. I’ve some machining experience. Slowly working on a 9 cylinder radial from Ageless Engines, Lee Hodges design. Anyone else working this model presently?

Curious about your mill socket - - - dunno if I've ever see that kind of male end (on your milling cutters in the pic).

TIA

 

[ddallen1]

Torm

Curious about your mill socket - - - dunno if I've ever see that kind of male end (on your milling cutters in the pic).

Tormach mill tooling is what you are seeing. I’ve attached a short video on my introduction for you to see this in action

 

[ajoeiam]

Hmmmmmmmm - - - - asked the question because the tooling that I'm seeing has, for me anyway, an unusual end(s) to it.
Maybe you're using some kind of collet system but when I look at the Tormach sales literature all I can see is R-8 and BT30 spindles.
Your pic shows something that isn't either of those.

 

[ddallen1]

Hmmmmmmmm - - - - asked the question because the tooling that I'm seeing has, for me anyway, an unusual end(s) to it.
Maybe you're using some kind of collet system but when I look at the Tormach sales literature all I can see is R-8 and BT30 spindles.
Your pic shows something that isn't either of those.

The Tormach R8 collet is special as it has a flat register on it that accepts these tool holders. This is such that it allows accurate “z” indexing of the tools. You can rapidly change tools while maintaining tool presets. Look at Tormach tool holders for a better idea how these work.

 

[awake]

Welcome to the forum!

 

[ajoeiam]

The Tormach R8 collet is special as it has a flat register on it that accepts these tool holders. This is such that it allows accurate “z” indexing of the tools. You can rapidly change tools while maintaining tool presets. Look at Tormach tool holders for a better idea how these work.

Hmmmmmmm - - - - took some digging - - - - its called TTS tooling.
TTS = Tormach Tooling System
means its proprietary - - - - and its only sold by them (for now) - - - - - I'm wondering how many more tooling systems are needed????????
(Morse, Jacobs, Cat, NMPT, ISO, Capto, can't remember Kennetal's version, BigPlus and now also TTS that's besides all the shrinking systems and collet systems - - - - talk about market fracturization!!!!)

 

[SmithDoor]

Hmmmmmmm - - - - took some digging - - - - its called TTS tooling.
TTS = Tormach Tooling System
means its proprietary - - - - and its only sold by them (for now) - - - - - I'm wondering how many more tooling systems are needed????????
(Morse, Jacobs, Cat, NMPT, ISO, Capto, can't remember Kennetal's version, BigPlus and now also TTS that's besides all the shrinking systems and collet systems - - - - talk about market fracturization!!!!)

Welcome to the group

Dave