ok guys I just finished my trade as a small engine mechanic. thanks to the Australian government I get a nice little cash hand out so I am going to shout my self a new lathe. I am looking at a al-336d does anyone have one or can anyone give my some advice on them? I have attached pic and the specs of the lathe. thanks cam
ORDER CODE
L682D
Model
AL-336D-DELUXE
Digital Readout System Fitted
Quick Change Toolpost Fitted
Leadscrew Covers Fitted
Coolant System
Tool Height To Suit
12mm
Distance Between Centres
900mm
Swing Over Bed
300mm
Swing Over Cross-slide
180mm
Swing In Gap
450mm
Centre Height
150mm
Spindle Bore
38mm
Spindle Nose Size or Type
D1-4 Camlock
Bed Width
180mm
Headstock Spindle Taper
5MT
Tailstock Taper
3MT
Cross Slide Travel
170mm
Compound Slide Travel
75mm
Leadscrew
Imperial
Cross Feed Range (X-Axis)
0.009 - 0.236mm/rev
Longitudinal Feed Range (Z-Axis)
0.04 - 1.2236mm/rev
Metric Thread Steps & Pitch Range
32 (0.4 - 7mm)
Imperial Thread Steps & TPI Range
36 (4 - 60tpi)
3 Jaw Chuck Diameter
160mm
4 Jaw Chuck Diameter
200mm
Spindle Steps / Speed Range
18 (65 - 1810rpm)
Motor Power
1.5kW / 2hp
Voltage
240V
Weight (nett)
595kg
ORDER CODE
L682D
Model
AL-336D-DELUXE
Digital Readout System Fitted
Quick Change Toolpost Fitted
Leadscrew Covers Fitted
Coolant System
Tool Height To Suit
12mm
Distance Between Centres
900mm
Swing Over Bed
300mm
Swing Over Cross-slide
180mm
Swing In Gap
450mm
Centre Height
150mm
Spindle Bore
38mm
Spindle Nose Size or Type
D1-4 Camlock
Bed Width
180mm
Headstock Spindle Taper
5MT
Tailstock Taper
3MT
Cross Slide Travel
170mm
Compound Slide Travel
75mm
Leadscrew
Imperial
Cross Feed Range (X-Axis)
0.009 - 0.236mm/rev
Longitudinal Feed Range (Z-Axis)
0.04 - 1.2236mm/rev
Metric Thread Steps & Pitch Range
32 (0.4 - 7mm)
Imperial Thread Steps & TPI Range
36 (4 - 60tpi)
3 Jaw Chuck Diameter
160mm
4 Jaw Chuck Diameter
200mm
Spindle Steps / Speed Range
18 (65 - 1810rpm)
Motor Power
1.5kW / 2hp
Voltage
240V
Weight (nett)
595kg