- Joined
- May 27, 2010
- Messages
- 2,999
- Reaction score
- 1,171
Plan to build this engine next year .Bought plans and the Best of Model Engineer,100 Page special Autumn 2013 Magazine.
Still wondering am I chewing off too much more than I can swallow and digest.Have I the all the required skills/determination to complete from scratch. Have not jumped in yet. Having very bad cold feet.
Engine is about same overall dimension of Rupnow's Hit & Miss Engine but with overhead cam drive . Overall height is 165mm.
The magazine has very good write-up take reader thru step by step or rather
foto by foto.
Hi Meisters/Maestros. Your kind advice is requested.
Still wondering am I chewing off too much more than I can swallow and digest.Have I the all the required skills/determination to complete from scratch. Have not jumped in yet. Having very bad cold feet.
Engine is about same overall dimension of Rupnow's Hit & Miss Engine but with overhead cam drive . Overall height is 165mm.
The magazine has very good write-up take reader thru step by step or rather
foto by foto.
Hi Meisters/Maestros. Your kind advice is requested.
Last edited: