Need help identifying engine
- Thread starter Wayne j
- Start date
Help Support Home Model Engine Machinist Forum:
RMC type A by Nick Roland, he should be able to sort you out with the drawings
http://rowland.20megsfree.com/
Not so easy to get running now that they don't make MAPP gas like they used to, I converted mine to 4-stroke
http://rowland.20megsfree.com/
Not so easy to get running now that they don't make MAPP gas like they used to, I converted mine to 4-stroke
Correct me if I am wrong but I think Nick is still making these.
Thank you so much! I will contact him Ro see if I can get the plans. I really like your 4 stroke conversion. I may go that route. Did you have plans for that or develop it yourself? Thanks again
Wayne
HopperW He has done a few odd small batches in recent years but I have not seen anything in the last two or three years, He sells via e-bay or an add on Smokstak, that is how I got my type B and I asked to be contacted when he had a type D which he did. Just waiting for him to make some more ignition modules and get the drawings done for the SB2c
Wayne, I drew it up myself, the epicyclic gear was scaled down from an Alyn Foundry Robinson X type that I had previously made.
Wayne, I drew it up myself, the epicyclic gear was scaled down from an Alyn Foundry Robinson X type that I had previously made.
About 6 months ago he said he was having trouble finding a foundry that would cast his kits. He showed me a couple more fun models he had in the works, but hadn't heard anything since then.
