My Week this Week, My workshop videos

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Fordson E1A major, Rebuild. In which I get all the small parts painted ready to reassemble the pedals and footboards, a short week but good progress, if you have lots of small and medium sized parts to paint, best hang the lot up and do them all at once with a spraygun, makes a better job, covers all the awkward shapes and then LEAVE THEM TO DRY! you know you'll make a mess if they are not hardened off!!
Phil, its bloody cold in East Yorkshire!
 
Due to a wonderfully enjoyable tooth abcess that came out of the blue last Sunday I have not been to the workshop this week, Back next week,!
Phil, In wonderfully windy east Yorkshire
 
I actually get some time on the tractor, fitted in between my busy other life! footpedals back on, connected up and adjusted, then removed again and refitted the right way round! Footplates on and get onto the mudguards and get them flatted and another layer of filler on! We are going forwards again!
Phil, in cold and windy East Yorkshire!
 
A little tractor content, but mainly converting the first 8ft fluorescent fitting to led! Another week of distractions, emergencies, and fraught with stress and problems, I will tell you all about it when it is all over.......
Phil, in Bright,windy and cold East Yorkshire
 
Back on the tractor, and more spare time as the house sale nears its end. On to filling and priming the panels, and stoppering to fill all the pesky blowholes in the filler, and all the bits I missed! My least favourite part of the job, as it takes patience, and whilst I can display endless patience with rebuilding anything mechanical or electrical, because it is interesting, the same does not apply to refinishing, so my method is shortest possible route to a durable and acceptable shine! Phil, in easterly gale East Yorkshire
 
I make a start on the final peices of the Fordson jigsaw, get the bonnet and front cowl into red lead and grey primer, and start to deal with the massively oval holes on the tow hitch! Keeps me out of mischief!
Phil, Spring is almost here in East Yorkshire
 
Another short video detailing more of what I didn't get done than showing what I did! Sometimes we are swept forward by the tide of events, sometimes back! This week it was definitely back! I challenge you to watch and enjoy! Normal service will be resumed ASAP. At least it is officially SPRING!! That would be why the rain is Warmer in East Yorkshire!
Phil.
 
I get all the insides and edges of the painting finished, clean up and paint the 3 point components, and make the bushes for welding into the towwbar pin holes, which have been worn oval by the years since 1955! I know how they feel, being a 1952 model myself!!
Phil, in warm and springlike East Yorkshire!
 
First job I get on with the tow hitch repairs, fitting the bushes I made last week into the badly worn oval holes and welding them in, and then pad welding the pins, and also the holes in the plates that the hitch attaches to, and then PAINT!! I get everything that is left to paint cleaned up, primed up and painted, and don't it look sweet!
Phil, Bright and sunny with a chill breeze in East Yorkshire
 
I finish rebuilding the three point linkage and the towhitch, and start the electrics and dashboard, as soon as i get the regulator sorted and refitted, along with the wiring harness, the only job left will be to paint the rear wheels!
Happy Daze
Phil in really very hot East Yorkshire!
 
In which I build a dynamo test bench, and proceed to test dynamos and the wiring harness and the regulator. I do make progres! There are frustrations, but generally every day is a school day and I am learning all the time, or at least trying to remember back to the time before about 1973 when all motor vehicles had dynamos, and I used to service them all the time. You forget a lot in 50 years!!
Phil, back to snow and cold in East Yorkshire!
 
I find multiple faults with the dynamo, wiring harness and the regulator box and cutout, and fix them all! I set the charging rate and cut in point, then I start the fiddly process of rebuilding it all back into the tiny dashboatd box that it all lives in! I discover that I need to buy more black insulation tape!
Phil, in sunny, rainy and windy East Yorkshire
 
Suddenly it all goes back together, and it is finished apart from the front grille protector, and the roll over safety bar, which will be next week!, and then I spend Saturday trying to sort why I cant edit it untill I findthat my 2TB drive is FULL! a file has been saving duplicates of all my videos since day one! I get it sorted, and eventually get it online. I am proud of the tractor, but not the video and the sound falls odd towards the end of part two, but it is what it is, as they say on Salvage rebuilds UK!
Phil, warm and sunny with long grass in East Yorkshire
 
Still struggling with the video chaps!, having no gopro after all this time is like having a hand missing! I am getting a new camera tomorrow and the gopro is going in for repair! The rear wheels are fitted, and the oil goes in gearbox and transmission. New parts arrive, and some don't fit but we get excellent service from MKH and get the replacements inside the week!! I work on the injector pump stop/extra fuel mechanism, and get that back on correctly this time, and drag the roll over bar out of the store and get it cleaned up. Phil, in sunny and warm East Yorkshire.
 
This week I repair the ROPS and paint it, and all the lighting components that arrived in three different colours, This could be the final week on the tractor, and time to move onto the Big Bee topper, but there are going to be interuptions! Mothers Moving day is friday the sixth and she has to be out because the new owners are moving in! So I will need to be up there for a few days prior, We will see what I can get done!
Phil, in gloriously sunny, but not too hot East Yorkshire
 
A quick catch up as I have been busy moving Mum to her new home this week,Back to the tractor next week, and also more of clearing an old engineers workshop!
Phil, in sunny and rainy East Yorkshire
 
The big clearout of my late neighbours shed continues, my almost empty washers box is now overflowing, and there are lots of usefull goodies appearing as I empty the rest, plus instructions on Megger testing electric motors for earth faults, and my usual wit and wisdom, such as it is!!
Phil, in Scorching East Yorkshire
 
More clearing and sorting of the workshop stuff, and a few interesting finds. I have come up with a strategy! Next week I will finish the tractor, and then the grass cutter, and when they are done and out, I am going on a cull of all my junk, starting in the Outside store, which is full of junk, much of which can be scrapped, as the price is very good at the moment, and that will give me somewhere to move the stuff from the downstairs stores, which are impractical, as they are too far away from the workshop proper!, of course as I move the stuff, much of that will also be culled!!
Phil, the grass waits for no man in East Yorkshire!
 
Yes folks, all my goodies are sorted away, and I get to spend a whole day fitting the ROPS and wiring the lights on the tractor! I will be back on it full time next week, and then onto the topper/grass cutter, which will be brief, as it is only to check over, one swing slasher to free off, sharpen, and a coat of paint!
Phil, in monsoon hit East Yorkshire!
 

Latest posts

Back
Top