My own Engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks Hilmar and Ariz...next goal is on my scope....!!!! :big: :big: :big:
 
Ancillaries are going at right place...safety valve and pressure gauge; I had to rebuilt his fixing bolt!!! :fan:
DSC02064.jpg

The clack valve...
DSC02063.jpg
 
Oooh
Now I've got a bad case of Boiler envy ;D.

lovely work Paolo.
Cheers
Phil
 
Hello Phil & Carl
Thanks for supporting me..Is very helpful... :bow: :bow: :bow:
Best regards Paolo
 
Paolo,

Paolo said:
Ancillaries are going at right place...safety valve and pressure gauge; I had to rebuilt his fixing bolt!!! :fan:

What fixing bolt?

Dave
 
You have right Dave!!...The special bolt for the pressure gauge siphon ...
Other ancillaries are made...I refined my tube bender and tomorrow I'll post the pics of my progresses
Best regards
Paolo
 
I'm not sure which burner I have to install...mainwhile I'm deciding I'm trying to prepare a base with the two possibilities... :big: :big:
upper or lower...this the problem
DSC02068.jpg

silver soldering the base with a strut...
DSC02066.jpg
 
Finally I decided to use the ceramic burner but I praticed also the tapered hole for putting the boiler more high on the base if I would like to use the modified one...I need to prepare a band for closing the space when it is in use!!!
Have a look at ceramic burner fixed on place:
DSC02074.jpg

another view:
DSC02075.jpg
 
No really Paolo, I do like it! your doing a great job!

Are you going to put in air shutters around the base of that to control the draft?

Dave
 
Nice work Paolo. :bow:

Best Regards
Bob
 
Hi my Friends..thanks again..
No Dave I don't think to place the shutters at moment The original project didn't ...
Cheers
Paolo
 
Another step ...presentation board..DONE!!
DSC02087.jpg

Test fitting for the ole project... :big:
DSC02088.jpg

More test... :big:
DSC02090.jpg
 
I take it there is going to be a big suprise under the cloth? ;D

Dave
 
"Don't mind the man behind the curtain ........". Paolo, show us! th_wwp The suspense is getting to be unbearable....


BC1
Jim
 
Paolo, that's a very nice looking presentation board !
Regards, Arnold
 
Ohhhhhhhh please...! Don't ask! ::) ::) Is not polite to see a lady during a make up session!!!
Cheers Paolo :big: :big: :big:
 

Latest posts

Back
Top