Mini Oilcan

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

kuhncw

Well-Known Member
HMEM Supporting Member
Joined
Apr 12, 2008
Messages
918
Reaction score
158
Location
USA ILLINOIS
Plugging "mini oil can" into the search came up with this:

The plans are in a zip file at the bottom of post #10, dated 26 Feb 2017.

Nice work on the launch engine.

Regards,

Chuck
 

bluejets

Well-Known Member
Joined
Apr 22, 2014
Messages
434
Reaction score
157
I just completed an operating launch engine from Elderberry Steam Engines. It took me 10 months because I had to learn how to operate a recently acquired Bridgeport Mill in addition to polishing my long dormant lathe skills.

Just a note that tygon fuel tube is not as likely to kink as your clear plastic tubing.
 

byawor

Well-Known Member
Joined
Aug 15, 2014
Messages
77
Reaction score
21
Location
regina canada
I had some time and the material so did this one. Not as pretty as the others but an interesting project. I had thin wall tubing that was close to required size so it saved a bunch of boring and reaming. Nice project thanks for posting the plan
Bob
 

Attachments

  • oilcan.jpg
    oilcan.jpg
    52.3 KB · Views: 0

Latest posts

Top