Mini Bike

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Steve,

Looking good ... any chance of a You Tube?

That would be so :cool: to watch.

Path
 
I'm interested in the type of CNC mill that you have, is it a home made conversion or a dedicated CNC?

Paul.
 
Last edited:
I'm imterested in the type of CNC mill that you have, is it a home made conversion or a dedicated CNC?

Paul.

It's not a conversation. I built the machine with a compound drilling table and fabricated the rest with eBay purchases. The machine is pretty ugly but it makes pretty good parts. I'll see if I can find the thread that shows what I did.
 
No problem, still had the link in my massages from when you send it to me about a month ago
 
Which part?

The first side was about 3 hours. I could do a few minute video of the part you want to see but 3 hours would be boring to most people.

Any part works for me! :D
Maybe 5 minutes or so ... of several of the larger parts where lots of chips go flying everywhere.

Your stills look great too ... so don't stop those.


Path
 
Well I have all 9 programs complete, debugged, optimized, and ready to go. There are some unavoidable things I will have to live with but I think the finished product will be nice with a little hand work to smooth out the spots where the programs overlap. All the little "bad" things you see have been addressed and with a good setup I should be able to minimize the rest of the tool marks. The next one should be a big improvment over what you see here.


DSCN2113s.jpg~original



DSCN2114s.jpg~original



DSCN2115s.jpg~original



DSCN2116s.jpg~original



DSCN2117s.jpg~original
 
Damn, you would have to shoot that right next to a can of Vernors- the one thing I miss about leaving Detroit for Maine.
 
Steve,

Looking good ... any chance of a You Tube?

That would be so :cool: to watch.

Path

I have started to carve out a few blocks now that the code is complete.

For you Path . . .

[ame]https://www.youtube.com/watch?v=4wSocQGFaCo[/ame]
 
Last edited:
OK gentleman, heres the real deal.


Cut the top first

DSCN2101s.jpg~original




Then the bottom

DSCN2100s.jpg~original



Left side lower

Step3-2.jpg~original



Left side fins

Step4-2.jpg~original



Right side lower

DSCN2142.jpg~original




Right side fins

DSCN2145.jpg~original




Rear of case minus the timing gear house.

DSCN2151.jpg~original




Rear timing case.

DSCN2153.jpg~original




Entire front

DSCN2160.jpg~original




And there you have it

DSCN2162.jpg~original


DSCN2163.jpg~original


DSCN2165.jpg~original


DSCN2168.jpg~original


DSCN2171.jpg~original
 
Steve that looks awsome,
But I have gotta ask..... You got the code ready for us yet :)

You do do nice work.
 
do you have any of the internals drawn up or thought ot yet?

are you reverse enginering a full scale ?
 

Latest posts

Back
Top