MD 0,51cc DIESEL

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mdanna

Member
Joined
Feb 1, 2013
Messages
17
Reaction score
2
I live in Brazil!
I had already built two diesel engines.
Now I tried to build a small one, and it worked.
This engine is 0.51cc, I designed all the parts.
The fuel is 30% Solbrax, 30% castor oil, 30% ether.
 

Attachments

  • IMG_20201019_084145005.jpg
    IMG_20201019_084145005.jpg
    98.7 KB · Views: 121
  • IMG_20201019_091059032.jpg
    IMG_20201019_091059032.jpg
    74.2 KB · Views: 123
  • IMG_20201019_091159186.jpg
    IMG_20201019_091159186.jpg
    114.8 KB · Views: 109
1: Awesome!

2: What is Solbrax? I assume it's a local brand name for kerosene or automotive diesel.
 
Mark Lubbock's "Midge" certainly inspired a lot of engine designs, the Boll Aero and this one most certainly. Well done, your transfer passages are different and I guess an improvement.
 
The inspiration for the design of this engine came from several sources.
Yes the transfer passages were inspired by Midge, I already built a Midge.
 
I did a basic drawing and the rest was resolved as I did the pieces.
I will improve the drawing so that it is understandable.
 
I did a basic drawing and the rest was resolved as I did the pieces.
I will improve the drawing so that it is understandable.
thanks! o got the plans!!!! looks very nice!!!! thanks again!
hope you make the weaver and share your progress! Rodrigo
 
Hi Mdanna. I hate to start the avalanche but.........Could I get a set of those plans too?
And I don't mean to seem greedy but.........Could I get a set of one of the larger ones you've built?
Ken
 
Hi Mdanna. I hate to start the avalanche but.........Could I get a set of those plans too?
And I don't mean to seem greedy but.........Could I get a set of one of the larger ones you've built?
Ken
 

Attachments

  • MD 0,51cc.pdf
    71.9 KB · Views: 68

Latest posts

Back
Top