Mamod TE1A crane jib.

[darwenguy]

Hi all, finished up a batch of my crane accessories for the mamod traction engines. Not sure of relevent here, but they go on an engine and shiny mechanical stuff must appeal to some like me.
All made from my own castings, the whole assembly simply clamps to the front of the engine and the drive band is switched from driving the wheels to driving the crane pully. The forward/reverse leaver then becomes up and down for the hook.
It has a gear reduction to increase lifting power and add more interest.

 

[timo_gross]

How many tons can it lift? Did you also cast the big red gear and the drive pulley?

 

[darwenguy]

Oh id say about .0000250 tonne haha.
And yes i use the same castings for pully and the big gear, i made another post thread on the automated gear machining set up i used as 80 teeth to cut by hand is no fun.