Mamod TE1A crane jib.

Help Support HMEM:

darwenguy

Well-Known Member
Joined
Oct 26, 2013
Messages
116
Reaction score
89
Hi all, finished up a batch of my crane accessories for the mamod traction engines. Not sure of relevent here, but they go on an engine and shiny mechanical stuff must appeal to some like me.
All made from my own castings, the whole assembly simply clamps to the front of the engine and the drive band is switched from driving the wheels to driving the crane pully. The forward/reverse leaver then becomes up and down for the hook.
It has a gear reduction to increase lifting power and add more interest.
20210502_153145.jpg

20210502_153530.jpg

20210502_153539.jpg

20210502_153554.jpg

20210502_153609.jpg

20210502_153618.jpg
 

timo_gross

Active Member
Joined
Feb 26, 2020
Messages
30
Reaction score
18
How many tons can it lift? Did you also cast the big red gear and the drive pulley?
 

darwenguy

Well-Known Member
Joined
Oct 26, 2013
Messages
116
Reaction score
89
Oh id say about .0000250 tonne haha.
And yes i use the same castings for pully and the big gear, i made another post thread on the automated gear machining set up i used as 80 teeth to cut by hand is no fun.
20210427_112118.jpg

20210427_143241.jpg
 
Top