Powder keg
Well-Known Member
- Joined
- Oct 10, 2007
- Messages
- 1,091
- Reaction score
- 3
Well I couldn't wait till I had a weekend. I started school again and I have the opportunity to practice my CNC skills:O) So I started on my engine. I did the displacer cylinder a few days ago. It was turned in my lathe using a 3 jaw. I'll recreate that and post some pictures. Today after work I set the mill up and machined the pedestal. The main shank on it will be turned round in my lathe. I left a nub so I could center the piece in my lathe. After it is done, this will be removed. I didn't get any pictures because you couldn't see anything under the flood coolant.
Hope it runs:O)
Wes
Hope it runs:O)
Wes