looking for plans for a steam radial engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rodue

Project of the Month Winner!
Joined
Dec 29, 2010
Messages
136
Reaction score
152
any one know where I could down load prints for steam engine
 
Don't know about (free) download but Myers do a nice one.

https://www.myersengines.com/engines/steam_aircraft_engine.htm
If you are just going to just run on air then the Linley "Halo" might be found on the net, that's a 5cylinder. Could be altered for steam by changing the pipework to something that won't be affected by heat.
 
The Cygnet is a well proven design. Why not do a double rox, six cylinder version? witha hex crankcase, the design is begging for it! Kirk at Hemingways is a nice chap, and he'll sell you extra castings if you ask... He might want some photos of the finished engine though!
 
I want to thank every one for the information now all I have to do is get to run
 

Latest posts

Back
Top