Lanz tractor

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tapsa

Well-Known Member
Project of the Month Winner
Joined
Jun 25, 2009
Messages
53
Reaction score
49
My new project will take time, a year or two, I don't know.

lanz0.jpg

lanz2.jpg

lanz3.jpg

lanz4.jpg

lanz5.jpg

lanz6.jpg

lanz7.jpg

lanz8.jpg

lanz9.jpg

lanz10.jpg

lanz11.jpg

lanz12.jpg

lanz13.jpg

lanz15.jpg

lanz17.jpg

lanz18.jpg

lanz22.jpg

lanz23.jpg

lanz24.jpg

lanz26.jpg
 
Hi Tapsa .
That is Great Project !
I got a question, what engine do you use ?
 
I don't know the correct engine name in English, but I would assume a hot plug motor
 
I haven't had time to do it yet but I
 
Not so many parts are ready compared with the time used

lanz36.jpg
 
Hello everyone, has been busy for two weeks. I haven't had a workshop at all. I was a Speedway race in Latvia. from the video you can see Latvian competitions. I do not run a race, I'm only sponsor of the team.
Tapsa

 
Today I was able to do some parts again

lanz37.jpg

lanz38.jpg

lanz39.jpg

lanz40.jpg

lanz41.jpg

lanz42.jpg

lanz43.jpg

lanz44.jpg
 
Hello everyone, has been busy for two weeks. I haven't had a workshop at all. I was a Speedway race in Latvia. from the video you can see Latvian competitions. I do not run a race, I'm only sponsor of the team.
Tapsa



In another life, many, many years ago (1968 ), I had the opportunity to run a couple Speedway races in Orange County, California.

As a flat track rider, I thought I was prepared to run competitively, and while I finished third on my first attempt, I didn’t have sponsorship, and was using a loaned bike (J.A.P. On a Hagon frame). That was an expensive sport, and as a teenager, beyond my financial capability to continue!

Thanks for the memories!!!

Sorry for the hijack, but I had to comment on the Tapsa post.
 
Speedway races were popular in 1968 in Czechoslovakia . I was big fan .
I have built little JAWA ESO speedway engine to remind my youth.
 

Attachments

  • P1020097.JPG
    P1020097.JPG
    48.7 KB · Views: 515
Hello kadora Have any drawings on your engine. I would be very interested in buying. Thank you for the great picture of the Jawa engine.
Tapsa
 
Hey everybody. Fuel tank and other small parts, I had time to do

lanz45.jpg

lanz46.jpg

lanz47.jpg

lanz48.jpg

lanz49.jpg

lanz50.jpg

lanz51.jpg

lanz52.jpg

lanz53.jpg

lanz54.jpg


Tapsa
 
Great work am following along with joy,its a pity there is not alot of model tractors being made,maybe this will start a lanz trend to make them,keep it up.
 
Thanks, I'm so busy with my work and can concentrate on this only on weekends, if even then.
 
Very nice Project, will follow it for sure.
About the gear, are you sure you used the right cutter?
It´s marked as #7 55-134 teeth. For a ten tooth gear it should be cutter #1
The gear (tooth) doesn´t look Right to me.

Michael
 

Latest posts

Back
Top