Majorstrain
Well-Known Member
- Joined
- Dec 24, 2008
- Messages
- 304
- Reaction score
- 4
Just a tip that might be helpful to some.
When I first made my fixture plate I tried to think of a quick and easy way to keep the holes clean from swarf and alike.
I've settled on baking paper, It's quick to put on and easy to replace. I hold it in place with magnets.
The alignment dowel pins just push right through as do the hold down bolts and all the unused holes are free from swarf.
Just don't tell the wife where here waxed paper went. :
Cheers,
Phil
When I first made my fixture plate I tried to think of a quick and easy way to keep the holes clean from swarf and alike.
I've settled on baking paper, It's quick to put on and easy to replace. I hold it in place with magnets.
The alignment dowel pins just push right through as do the hold down bolts and all the unused holes are free from swarf.
Just don't tell the wife where here waxed paper went. :
Cheers,
Phil