Junika - V Twin Boxer FS engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kadora

Project of the Month Winner!!!
Project of the Month Winner
HMEM Supporting Member
Joined
Jul 1, 2012
Messages
475
Reaction score
412
Hello friends
Maybe it is funny but I give a name to all of my engines .
This one is Junika - short of my name.
I machined engine over 1 year /with short breaks/
from AL castings designed and sand casted by me.
Bore/Stroke 20mmx20mm
Diameter of engine is 250 mm
Crankshaft in ball bearings
Four camshafts
Temporary Glow plugs ignition
All gears for spark plugs ignition are already fitted.
I always run my engines on glow plugs first and then
I switch to the spark plugs.
Now the most complicated part for me is to create
a solid holder to run engine .
I have to find a welder man who will be
"patient" enough to weld a frame for me.
Have a nice day.

P1020176.jpg


P1020179.jpg


P1020181.jpg


P1020183.jpg


P1020184.jpg
 
Wow. Great looking engine. Love to see a video of it running when you get your frame.
 
Awesome work. Must sound awesome running too. Like two BMW boxer engines joined at the hip!
 
kadora,

I was wondering if you were building something behind the scenes.

Your new engine is very interesting: I had to take more than one look at the pictures to take it all in. Great fit and finish too.

I hope you can show us a video so we can see and hear it running.

Thank you for posting,

--ShopShoe
 
I love that engine also would love to know the way you have set up the crank shaft
look up the caminez aero engine I think that's the correct spelling is this how you have set this up
awesome work regards john
just had another look at your engine definitely not the way you have done your set up
you have got my brain ticking over as I cant see that two cyls are offset to each pair

caminez.gif
 
Guys thank you for your kind words.

the engineer - sending picture of not finished crankshaft
and camshaft gears . /hope this helps/
Master con rod is in the bottom right corner.
Thank you

2017-04-30-2429.jpg


2017-05-23-2437.jpg
 
great now I see its done done as a standard radial sorry I was having brain fade as most radials are designed with odd number of cylinders for even firing I have often wondered what an even n=umber of cyls would sound like this should sound like heaven
I will be waiting for the video once again great work thanks for the pictures
 

Latest posts

Back
Top