Any advice about accessing John Tom? I have visited there in the past, but when I just tried I keep getting a Cloudflare error message. I saw a post about the #35 steam pump and thought I would get the plans and look at it. No luck. Both Firefox and Safari keep getting the same error message that it is not available. Any suggestions? Thanks Chewy
John Tom Site
- Thread starter costerjr
- Start date
Help Support Home Model Engine Machinist Forum:
I've just tried and I get the same message. I waited a couple of days before trying so there seems to be a major problem with the site.
Dave
The Emerald Isle
Dave
The Emerald Isle
I have the 35 Steam pump plans previously downloaded from John Tom website, if there is no legal reason why it cannot be posted here, I will post it. It was a free download from John Tom. The moderators must please comment.
methuselah1
Well-Known Member
- Joined
- Jan 28, 2020
- Messages
- 185
- Reaction score
- 50
He didn't like paying for copyrighted material either. He did that to me.
Maybe someone came knocking.
I hope the site comes back. They had a lot of great plans, many great for beginners.
I've actually downloaded several of the plans.
I bought the plans for the orange crane. Started gathering materials for it.
Not I have to learn about R/C!!!!
Greetings,
At least some of the site is accessible via the wayback machine on internet archive:
Cheers,
Stan
At least some of the site is accessible via the wayback machine on internet archive:
Cheers,
Stan
I just looked over that Archive site of John-Tom. Didn't look real hard, but it's nice to
know that site is there. I bookmarked it.
I purchased the plans for that r/c crane shown there. Slowly gathering up materials to build it.
It has r/c only on the boom lift and load lift, but I think with some "engineering" it could be
made to do more.
Thanks for the info!!
Jon
I've set up an RC construction area in the yard for the boys. That boom would be great for loading logs on the 6x6.
Similar threads
