John Deere type w

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jakediesel06

New Member
Joined
May 14, 2022
Messages
2
Reaction score
0
Location
New Jersey
Hi I’m new here. I’m looking to get a casting kit for a John Deere type w or something similar to that does anyone know where to find something like that.
Thankyou Jake.
 
I am not aware of a kit.
You could 3D model it, and make your own kit.

There was a fellow at NAMES in 2019 (remember that model engine show that use to be held up north? It was called NAMES, which I think now stands for "Not A Model Engine Show" anymore, sarcasm intended, put the pitchforks away).

He had it running at the show.
He made all the patterns, and had it cast in iron.

You could build your kit a bit smaller.
This would would be a bit heavy to lift and set on the table.

rImg_3504.jpg


rImg_3506.jpg


rImg_3509.jpg
 
Last edited:
I wanted a Galloway casting kit, but not at the size that was available, so I have started making my own 3D model, and will cast my own kit.
It can be done.
This is the 21st Century.
Screencapture attached.

Galloway-Overall.jpg
 
Back
Top