Joe Tochtrop Castings 2cyl overhead cam

Help Support HMEM:

zman92020

Member
Joined
Nov 12, 2015
Messages
5
Reaction score
2
I'm sure many of you remember Joe, who passed away in 2015. . I was able to rescue his model engine castings and patterns after his death. For the past year I've been completing four of his partially built Wall motor and recently started a fifth.. It is Joe's version of the 1930'd Wall Mariner Duplex 2 cycle, which Joe redesigned as a 2 cylinder overhead cam 4 cycle. . In the assortment of castings I found enough left to comprise 6 casting sets. . Here is my partially made project as I work through Joe's notes and plans. I did not find where Joe actually sold this kit although he did display one for the BAM's magazine. One of his friends in San Francisco also had one he built. . any others out there?

2 cylinder castings 004.jpg


2 cylinder castings 003.jpg


2 cylinder castings 002.jpg


2 cylinder castings 001.jpg
 

wirralcnc

Well-Known Member
Joined
Jul 24, 2010
Messages
89
Reaction score
22
Hi great looking engine. Are you selling casting set?
 

GKNIPP

Well-Known Member
Joined
Feb 22, 2013
Messages
52
Reaction score
5
Did you obtain the Economy ENGINE patterns too? Are you selling this kit?
 

zman92020

Member
Joined
Nov 12, 2015
Messages
5
Reaction score
2
I have 6 sets of castings for the 2 cylinder [$395]
2 sets for the Economy[$295] and 1 set for the Atkinson [$395]
Prices include shipping in USA only

There are some individual castings for these but not enough to make a full kit.

I have all of Joe's patterns. They are looking for a home also. Joe also had
kits for model airplane engines but I have no plans and only partial kits for these.
 

Ken K

Member
Joined
Feb 21, 2010
Messages
18
Reaction score
1
Joe also had a water pump kit. No one seams to making one anymore.Any plans to make any them.
Ken K
 

zman92020

Member
Joined
Nov 12, 2015
Messages
5
Reaction score
2
I've had requests for both Economy kits. one sold, one on hold pending payment.
Last Atkinson is now sold also. . .
All of the patterns are awaiting pickup and payment.

.
 

hitnmiss49

Active Member
Joined
Nov 18, 2007
Messages
38
Reaction score
6
I received the Economy Casting Kit today. Wow super fast shipping! The castings appear to be of excellent quality and I can hardly wait to get started machining them. They were packed very well and arrived in pristine condition. I am quite pleased with Dave's service and would not hesitate to purchase from him again.
Lonnie
 

the engineer

Well-Known Member
Joined
Aug 18, 2007
Messages
125
Reaction score
31
Location
new zealand
hi john here would you be prepared to send at my cost a twin casting kit if still availiable to newzealand sent you a pm but no repy so iwill try and contact you through here regards john
 

whitehouse260

Active Member
Joined
May 26, 2016
Messages
31
Reaction score
15
Location
La Grange, kentucky
Hi, I bought one of these kits on ebay with the plans. However I have misplaced the plans..... oops. Is there any chance I can get a copy of yours?
Thanks,
Matt
 

Latest posts

Top