- Joined
- Aug 25, 2007
- Messages
- 3,890
- Reaction score
- 715
I believe I've acquired most of the raw materials needed for the horizontal boiler that will power my Moteur Oscillant steam engine. It will be 3.125" diameter by (probably) 7" long. I have 1 3/8" OD copper pipe for the flue, 3/8 OD x 1/4" ID copper pipe for the cross tubes, 1/8" copper rod for the stays, and 7/8" OD bronze rod for the fittings. Not shown, I also have some ez flow silver solder. Should be enough to get started.
Chuck
Chuck